Return to site

Brother Printer Dcp J125 Unable To Print 4f

broken image


One day I've encountered about this error 'Clean unable 50' displaying at my Brother DCP 195C screen. Immediately I search online for the needed solutions. And luckily I've found one.

Free download youtube downloader pro full version for windows 7 iso. This method is not working with DCP-J125 coz DCPj125 doesnot have set bottion. My problem start when i start update the firmware of printer(all in one printer scanner and copier) n suddnly power gone. N after the restoring the power my printer is not working, even my on/off button is also not working. And Only LCD displayed some black and white vertical lines and nothing, not a single. A PQCS will print. If the PQCS prints successfully, your machine is working properly. The issue has been resolved. If the PQCS doesn't print because 'Unable to Init. 4F' reappears and you have not cycled the power, go back to step 11. If the PQCS doesn't print because 'Unable to Init. 4F' reappears and you have cycled the power, continue.


The following are the procedure on how to fix the 'Clean unable 50' error of the Brother DCP 195C printer.
1. Plug in the printer and turn it ON.
2. Usually the error display's on screen, Press OK.
Printer

3. Then press MENU.
4. Press MONO.
5. Press the UP ARROW four(4) times. Then you notice that the ATTENTION LED and the PHOTO CAPTURE button are simultaneously blinking.
6. Enter 80 to go to maintenance mode. When encoding the numbers (80) follow this:
- press UP ARROW button until the number 8 appears. press OK.
- press UP ARROW button until the number 0 appears. press OK.
7. Next, press continuously the MONO button until the 'Purge:________' appeared.
Brother printer unable to print 50

3. Then press MENU.
4. Press MONO.
5. Press the UP ARROW four(4) times. Then you notice that the ATTENTION LED and the PHOTO CAPTURE button are simultaneously blinking.
6. Enter 80 to go to maintenance mode. When encoding the numbers (80) follow this:
- press UP ARROW button until the number 8 appears. press OK.
- press UP ARROW button until the number 0 appears. press OK.
7. Next, press continuously the MONO button until the 'Purge:________' appeared.

Brother Printer Unable To Print Zc

8. Now, enter 2783 by doing the same procedure on step 6. The counter will be reset.
9. Press STOP/EXIT.
10. Enter 99 by doing the same procedure on step 6 to exit Maintenance Mode.
The printer will automatically restart and works normally.

Brother Printer Unable To Print 0a






broken image